Signs Your Kenmore Belt Needs Replacement Before reaching for your tools, it is important to confirm the belt is the source of the problem. If the washer operates quietly and spins as expected, the replacement is successful.
Securing the Belt Tight on Your Kenmore Washer
Remove the thin metal or plastic cover plate using the appropriate screwdriver, exposing the motor and the tension spring assembly. You will need a standard set of screwdrivers, both flathead and Phillips, to access the belt housing.
The belt should feel firm and exhibit about 1/2 inch of deflection when pressed firmly with your thumb. If the motor runs but the drum remains stationary, the belt has likely snapped or come completely off its tracks.
Secure Belt Tight: Essential Kenmore Belt Replacement Steps
Slowly release the motor, allowing the tension spring to pull the motor forward and tighten the belt. Finally, slide the belt over the motor pulley, taking care not to twist it.
More About Kenmore belt replacement
Looking at Kenmore belt replacement from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Kenmore belt replacement can make the topic easier to follow by connecting earlier points with a few simple takeaways.
