Signs Your Kenmore Belt Needs Replacement Before reaching for your tools, it is important to confirm the belt is the source of the problem. Check the area around the belt guard to ensure no wires or hoses were disturbed during the process.
Easy Kenmore Belt Replacement Repair Guide
This sound occurs because the belt has stretched or glazed, reducing its grip on the pulleys. Finally, slide the belt over the motor pulley, taking care not to twist it.
Proper tension is critical for the longevity of the new belt. Slowly release the motor, allowing the tension spring to pull the motor forward and tighten the belt.
Easy Kenmore Belt Replacement Repair Guide
Then, route the belt over the idler pulley, ensuring it aligns with the grooves. You will need a standard set of screwdrivers, both flathead and Phillips, to access the belt housing.
More About Kenmore belt replacement
Looking at Kenmore belt replacement from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Kenmore belt replacement can make the topic easier to follow by connecting earlier points with a few simple takeaways.
