Remove the thin metal or plastic cover plate using the appropriate screwdriver, exposing the motor and the tension spring assembly. Another common symptom is the washer failing to spin or agitate, even though the tub fills with water.
Kenmore Belt Replacement Test Cycle Verify
At this point, you can slide the old belt off the motor pulley and the drum pulley, noting the exact path it took. Slowly release the motor, allowing the tension spring to pull the motor forward and tighten the belt.
Select a short test cycle, such as a quick wash, and observe the machine in action. An adjustable wrench or a socket set is useful for removing the motor mount bolt, which provides the necessary slack to remove the old belt.
Kenmore Belt Replacement Test Cycle Verify Steps
Push the washer back into position and reconnect the power. Check the area around the belt guard to ensure no wires or hoses were disturbed during the process.
More About Kenmore belt replacement
Looking at Kenmore belt replacement from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Kenmore belt replacement can make the topic easier to follow by connecting earlier points with a few simple takeaways.
