At this point, you can slide the old belt off the motor pulley and the drum pulley, noting the exact path it took. Then, route the belt over the idler pulley, ensuring it aligns with the grooves.
Kenmore Belt Replacement Money Save Fast
Before starting, always unplug the washer from the electrical outlet to eliminate the risk of shock. Dealing with a slipping or noisy Kenmore washer often points to one specific culprit: the drive belt.
You will need a standard set of screwdrivers, both flathead and Phillips, to access the belt housing. While the new belt is still slack, loop it around the largest pulley—the drum—first.
Kenmore Belt Replacement Money Save Fast
Installing the New Belt Correctly With the old belt removed, inspect the pulleys for any debris or residual rubber. Once the correct tension is achieved, tighten the motor mount bolt to lock the position in place.
More About Kenmore belt replacement
Looking at Kenmore belt replacement from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Kenmore belt replacement can make the topic easier to follow by connecting earlier points with a few simple takeaways.
