Tools and Materials Required Gathering the right tools is the first step toward a successful repair. Finally, test the latch; if the door must be slammed or pushed firmly to engage the deadbolt, the strike plate is probably misaligned.
Fix Sagging Door Frame Alignment
You will need a standard screwdriver set, a hammer, a measuring tape, and a reliable pencil for marking. For a more permanent fix involving hinge adjustments, you will require specific hinge shims or thin pieces of metal cut to size.
If the door is sagging, move the bottom hinge slightly downward or the top hinge slightly upward, then gently tap the door into place before tightening the screws. If the screws in the hinges are stripped or too short, you will need longer wood screws to achieve a secure grip in the wall stud behind the door frame.
Aligning the Door Frame for a Proper Latch
As a building settles, the frame can become slightly misaligned, causing the door to shift upward or to one side. Start by loosening the screws on the hinge plates, both on the door and the frame, without removing them completely.
More About How to fix a sagging door that won't latch
Looking at How to fix a sagging door that won't latch from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to fix a sagging door that won't latch can make the topic easier to follow by connecting earlier points with a few simple takeaways.
