From below, slide the new rubber washer onto the drain body, followed by the metal retaining nut. Clean the threads on both the drain body and the P-trap with a rag to remove old putty and mineral deposits.
Common Bath Drain Problems and How to Fix Them
Remove the drain strainer by unscrewing it counterclockwise; if it is stuck, a screwdriver gently prying around the edges often loosens debris. Once the strainer is out, locate the slip nut connecting the drain body to the P-trap.
Press the flange firmly into the drain hole on the tub floor, ensuring it sits level and flush. Next, attach the P-trap or tailpiece by aligning the slip nut with the threads on the drain body.
Common Bath Drain Problems and How to Fix Them
After removing the slip nut, take out the old rubber or plastic washer and inspect it for cracks or flattening. Installing the New Drain Begin the installation by applying a generous, even layer of plumber’s putty around the underside of the new drain flange.
More About How to change bath drain
Looking at How to change bath drain from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change bath drain can make the topic easier to follow by connecting earlier points with a few simple takeaways.
