If the drain body itself is corroded or cross-threaded, this is the ideal moment to install the new drain kit. These washers degrade over time, losing their ability to seal properly.
Common Bath Drain Problems Solutions
Next, attach the P-trap or tailpiece by aligning the slip nut with the threads on the drain body. Tighten this nut by hand first, then use a wrench to secure it firmly, taking care not to overtighten, which can crack the tub or deform the flange.
After removing the slip nut, take out the old rubber or plastic washer and inspect it for cracks or flattening. From below, slide the new rubber washer onto the drain body, followed by the metal retaining nut.
Solving Common Bath Drain Problems Like Leaks and Clogs
Once the strainer is out, locate the slip nut connecting the drain body to the P-trap. Installing the New Drain Begin the installation by applying a generous, even layer of plumber’s putty around the underside of the new drain flange.
More About How to change bath drain
Looking at How to change bath drain from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on How to change bath drain can make the topic easier to follow by connecting earlier points with a few simple takeaways.
