When the cooler is pressed down, the paste spreads evenly across the surface. This gradual tightening ensures even pressure distribution.
Confirming CPU Cooler Mounting Success: A Step-by-Step Verification Guide
Installing the Cooler With the paste applied, you are ready to mount the cooler. Air coolers require the fan header, while AIO pumps need either a fan header or the dedicated CPU_PUMP header, depending on the motherboard.
During the first boot, enter the BIOS to verify that the CPU temperature idles in the safe range, typically between 30°C and 50°C, and confirm that the fan curves are active in the software. For AIO (All-in-One) liquid coolers, the process usually involves attaching the cold plate and fan to the radiator, securing the radiator to the case, and then mounting the cold plate to the CPU before connecting the pump and fan headers.
Confirming CPU Cooler Mounting Success Completely
Preparing the CPU and Motherboard The first practical step involves preparing the CPU socket. A common and reliable method is the "pea-sized dot" technique, where a small amount of paste is placed in the center of the CPU.
More About Mounting cpu cooler
Looking at Mounting cpu cooler from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Mounting cpu cooler can make the topic easier to follow by connecting earlier points with a few simple takeaways.
