5 ohms, while the secondary winding shows a much higher resistance, generally between 6,000 and 18,000 ohms. Carefully locate the ignition coil, which is typically mounted near the rear of the engine or under the seat on older models.
How to Test Harley Davidson Ignition Coil Resistance with a Multimeter
Typically, you will test the primary and secondary windings. Over time, the harsh environment under the saddle exposes the coil to heat, vibration, and moisture, which can cause external damage.
A reading of infinity (OL) indicates a broken wire, while a reading of zero suggests a short circuit. A digital multimeter set to the Ohms (resistance) function is required to measure the integrity of the coil's windings.
Test Harley Davidson Ignition Coil Resistance with a Multimeter
The primary winding usually registers a very low resistance, often between 0. The engine cranks but fails to start, indicating a total ignition failure.
More About Harley davidson ignition coil troubleshooting
Looking at Harley davidson ignition coil troubleshooting from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Harley davidson ignition coil troubleshooting can make the topic easier to follow by connecting earlier points with a few simple takeaways.
