Any reversal of the phase sequence will cause the magnetic field to rotate in the opposite direction, forcing the motor shaft to follow suit. Consequently, the rotor, following this rotating field, turns in the same direction.
Load Disconnection Phase Reversal Guide for Reversing Motor Rotation
This procedure involves altering the sequence of the AC power supply phases connected to the motor windings, which directly impacts the magnetic field and subsequently the shaft's rotation. If the sequence is altered to L1 → L3 → L2, the magnetic field reverses to a counter-clockwise rotation.
The connection terminals at the motor's terminal box are then accessed. Practical Implementation and Wiring To execute the change, the power supply to the motor must be safely disconnected and verified as de-energized.
Reversing Phase Sequence for Load Disconnection Motor Rotation Change
Always ensure the motor is disconnected from the load and that all locking and tagging-out procedures are followed to prevent accidental re-energization during the modification. If the rotation is incorrect, the power must be cut again, and the wires re-evaluated to ensure the correct pairs were swapped.
More About To change direction of rotation of a three-phase motor
Looking at To change direction of rotation of a three-phase motor from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on To change direction of rotation of a three-phase motor can make the topic easier to follow by connecting earlier points with a few simple takeaways.
