The width of the wheel, measured in inches, determines the tire contact patch. Backspacing, or the distance from the mounting surface to the back of the wheel, dictates how far the wheel sits inward.
Focus ST Offset Wheel Fitment Guide: Understanding Backspacing and Offset for Proper Installation
For the Focus ST, maintaining the correct offset is vital to avoid interference with the brakes and suspension components. If you plan to lower the vehicle, you will need to verify that the wheels do not scrape the suspension during compression.
However, going too wide can cause the tire to rub against the suspension or fender, especially during full lock or when the vehicle is lowered. Bolt Pattern and Center Bore The Focus ST typically uses a 5x112 bolt pattern, meaning five lugs are arranged in a circle with a diameter of 112mm.
Focus ST Offset Wheel Fitment: Understanding Backspacing and Clearance
The center bore, the hole in the center of the wheel, must also match the hub closely. Too little backspacing can push the wheel into the fender, while too much can strain the wheel bearings.
More About Focus st wheel size
Looking at Focus st wheel size from another angle can help expand the discussion and give readers a second clear paragraph under the same section.
More perspective on Focus st wheel size can make the topic easier to follow by connecting earlier points with a few simple takeaways.
